fbpx

Troubleshooting

We Proudly Service all of the Space Coast:

TITUSVILLE | MIMS | CAPE CANAVERAL | MERRITT ISLAND | COCOA BEACH | COCOA | ROCKLEDGE | VIERA | PALM SHORES | MELBOURNE | PALM BAY | INDIALANTIC | SATELLITE BEACH | MELBOURNE BEACH | INDIAN HARBOUR BEACH | GRANT-VALKARIA | MALABAR

As is with all technology, some systems require periodic maintenance.

If you are experiencing an issue with your Trimlight system, it typically is either a connectivity issue (connecting the app to the controller) or an issue with a component of the system.  If you are having issues connecting to the controller or with one of the functions such as timer/calendar issues, sequencing, music function, etc. you can check out the videos on Trimlight Corporate’s YouTube Channel or refer to the Customer Booklet that our install team left with you.  If your Trimlight system won’t power up, one or more of the diodes isn’t performing correctly or you’re having an issue with the channel or if you’re experiencing issues with our sconce lights, please fill out our Repair Request Form 

 Potential Issues with the Trimlights

The Light Is Behaving Differently, Or Not Working at All.

This does happen from time to time. Take a picture or video of the light and upload it to our Repair Request Form and we will have a technician contact you with steps to get it fixed.

A Section of Lights Isn’t Working Properly.

This happens periodically if there is a bad connection or a faulty light.  If we were your original installer, please take a picture or video and upload it to our Repair Request Form.  

Connecting to Home Wi-Fi

I’m Trying to Connect Trimlight To Wi-Fi, But It’s Not Showing Up as An Available Network on My Device.

The first step is to ensure the Trimlight controller in the box has an illuminated BLUE light near the VCC and GND terminals. If the blue light is not on, push the APA/STA button several times until the light is solid blue.  If the light does not change during this process, unplug the system and wait 20 seconds and plug it back in to give the system a soft reboot.  Repeat the previous steps until the light is blue.

I’m Trying to Connect the Controller to My Home Network, But Keep Receiving A “Connection Failed” Prompt.

A few things could be happening. Make sure the signal is a 2.4G Wi-Fi signal that you are connecting trying to pair with.  A 5G network will not pair with our controller. You may have a weak home network signal out where the controller is located.  Use a booster to boost the signal or use the Trimlight signal alone.  Unfortunately, some routers have a strict protocol that won’t allow a Trimlight system to pair with it.  In these instances, we suggest using the Trimlight signal.

The Network Says “Connection Successful,” But It Still Isn’t Connecting.

This can be common on initial connections and in most applications, is a simple fix.  If the light on the controller is still flashing green, unplug the system and plug it back in performing a soft reboot. The light should go to solid green.

Force close the app on the mobile device and reboot the device for a fresh operating system. Confirm the device is connected to the 2.4G Wi-Fi signal that was originally connected to the controller. Re-open the app and re-populate the list of available devices.  Do not push +Add device for a second time.  Allow 3-4 swipe downs until the controller name populates.

If the previous actions were still unsuccessful, it looks like your router may not be compatible with the system as is and you will need to use the Trimlight Wi-Fi Signal to control the lights. Push the AP/STA button until the light is blue to continue connecting through the Trimlight Network only.

I Have Multiple Controllers or Neighbors with Trimlight That Are Named the Same. Which One Do I Connect To?

Every Trimlight controller comes preset as named Trimlight.  Once you connect to the correct controller you are wanting to control, go into the device menu page and PUSH AND HOLD on the name Trimlight.  It will ask you to rename the lights. At this stage, name the lights whatever you would like to differentiate between neighboring controllers. Make sure to use no spaces or symbols.  Once this is completed, the Trimlight system will now broadcast only the name that you gave it.  To be sneaky, name it something no one would guess is your lighting system.

I Lost Power to The Unit and Now It’s Not Working Properly.

If there was a loss in power to the unit, like a power outage or the outlet being on a switch, the system may default to a standard color or pattern. You may need to open up the app and connect to the controller to re-send the data information back to the controller that was lost during the power outage.  We do not recommend controlling the power of the controller with a smart outlet or other external timer system that cuts power to the unit.